PHOTOCATALYTIC OXIDATION OF ALDEHYDES/PCE USING POROUS ANATASE TITANIA AND VISIBLE-LIGHT-RESPONSIVE BROOKITE TITANIA

We have synthesized an annealed porous aerogel titania (LUAG2), which demonstrates a very high photocatalytic activity for aldehydes and perchloroethylene (PCE) photocatalytic oxidation (PCO) in gas phase under blacklight and fluorescent light irradiation. LUAG2 has a BET surface area of 237 m²/g and a porosity of 0.31 (volume fraction). X-ray diffraction (XRD) analysis shows LUAG2 is nearly pure anatase. It has improved the destruction of PCE and aldehydes as a group by 10-34% with black light compared to Degussa P-25. The optimum water vapor to butyraldehyde molar ratio is around 1/3. LUAG2 also shows better mineralization to CO₂ than Degussa P-25 TiO₂ does. Under irradiation of a 4 W fluorescent lamp LUAG2 gives a consistently higher conversion than that of Degussa P-25. The highly active photocatalyst indicates potential applications in indoor and outdoor environmental pollution control. A visible-light-responsive TiO₂, NTB 200, is also investigated for comparison purposes.     

A stochastic Kaczmarz algorithm for network tomography

We develop a stochastic approximation version of the classical Kaczmarz algorithm that is incremental in nature and takes as input noisy real time data. Our analysis shows that with probability one it mimics the behavior of the original scheme: starting from the same initial point, our algorithm and the corresponding deterministic Kaczmarz algorithm converge to precisely the same point. The motivation for this work comes from network tomography where network parameters are to be estimated based upon end-to-end measurements. Numerical examples via Matlab based simulations demonstrate the efficacy of the algorithm.     

Viscosity of Porous Glasses

Viscosity of porous glasses has been derived from the elastic stress analysis, using the viscous analogy. Viscosity as a function of porosity has been estimated for spherical as well as for arbitrary pore geometry. Since the pore geometry changes during sintering, a shape factor that varies with pore geometry has been considered to predict the viscosity–porosity relationship. Viscosity as a function of porosity was measured on cordierite-type glass by isothermal sinter-forging experiments and data showed good agreement with the analysis. Experimental data from literature on viscosity as a function of porosity on two other glasses also show good agreement with the analysis.     

Graft copolymerization of 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid onto carboxymethylcellulose (sodium salt) by H2O2/Fe+2 redox pair

The effect of the reaction conditions on the grafting parameters during grafting of 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid onto sodium carboxymethylcellulose using H₂O₂/Fe⁺² redox pair are studied at 30°C. The grafting ratio, add on, and conversion initially increase with the H₂O₂ concentration in the range of (10.0–15.0) × 10^?2 mol dm^?3. Thereafter, these parameters decrease with the H₂O₂ concentration. The grafting ratio, add on, and conversion increase when increasing the ferrous ion concentration from (0.5 to 4.0) × 10^?2 mol dm^?3 and decrease with a further increase in the concentration. It is observed that the grafting ratio and add on increase with the monomer concentration, whereas the conversion decrease. The hydrogen ions seem to be facilitating the grafting reaction up to a certain concentration and after this concentration seem to be retarding the process. The grafting ratio, add on, and conversion decrease with the sodium carboxymethylcellulose concentration. When increasing the time period from 60 to 90 min, the grafting parameters increase but decrease thereafter. Similarly, when increasing the temperature from 25 to 30°C, the grafting parameters increase and decrease thereafter. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4819–4825, 2006     

CHARACTERIZATION OF GAS-LIQUID FLOWS IN RECTANGULAR BUBBLE COLUMNS USING CONDUCTIVITY PROBES

Unsteady gas-liquid flows in bubble columns are comprised of various flow processes occurring with varying length and time scales and govern mixing and transport processes. In the present work, we have characterized dynamic and time-averaged properties of gas-liquid flows in rectangular bubble columns using conductivity probes. The development of a single-tip conductivity probe, data processing methodology, and photographic validation procedure is discussed in detail. The effect of superficial gas velocity and aerated liquid height-to-width (H/W) ratio on voidage fluctuations and time-averaged gas holdup was investigated. The experimental data presented here can help in understanding the dynamics of various flow processes and validating computational fluid dynamics based models.     

Extension-dominated improved dispersive mixing in single-screw extrusion. Part 2: Comparative analysis with twin-screw extruder

In Part 1 of this work, the possibility of improving single-screw extruders (SSE) better dispersive mixer was explored by harnessing extensional flows provided by the hyperbolic contracting–diverging channels of extensional mixing elements (EME). Addition of the EME to the pin screw generated enhanced breakup for polymer blends and nanocomposite systems without significant penalty in flow rate. In Part 2, experiments are performed on immiscible polymer blends (low-viscosity ratio and high-viscosity ratio) and nanocomposites on both SSE and twin-screw extruder (TSE) with the same rotation speed and throughput. Morphological results show tremendous improvement in dispersive mixing capability of SSE when equipped with EME that are mainly comparable to conventional TSE that is, with kneading blocks as mixing sections, although not as good as TSEs equipped with EMEs. Mechanical results also show enhanced modulus when EME is used in SSE operations.     

A compact asymmetric slot dual band antenna fed by CPW for PCS and UWB applications

A compact slot antenna with an overall dimension of 30 × 30 × 1.6 mm³ is proposed for dual band applications. The radiating element is a hexagonal shape patch which protrudes from a Co‐Planar Waveguide (CPW) feed into a step shape slot. The slot is basically rectangular in shape and is extended by inserting rectangular cuts of different sizes on the ground plane around it. The ultrawide impedance bandwidth is achieved using asymmetric feed line along with extended rectangular cuts around the slot. For realizing the second band for personal communication system applications (near 1.9 GHz), a metallic stub of quarter wave length is attached at the top of the slot. The measured impedance bandwidth (for S₁₁ < ?10 dB) is 110 MHz (1.86–1.97 GHz) for the first band and 9 GHz (3.0–12.0 GHz) for the second band. The antenna is further characterized by omnidirectional radiation patterns in the H‐plane, dumb‐bell shape radiation patterns in the E‐plane and a peak gain of 3–5 dBi over the ultrawideband. All the measured results are found to be in good agreement with the simulated results. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:243–254, 2015.     

The Rank-Width of Edge-Coloured Graphs

A C-coloured graph is a graph, that is possibly directed, where the edges are coloured with colours from the set C. Clique-width is a complexity measure for C-coloured graphs, for finite sets C. Rank-width is an equivalent complexity measure for undirected graphs and has good algorithmic and structural properties. It is in particular related to the vertex-minor relation. We discuss some possible extensions of the notion of rank-width to C-coloured graphs. There is not a unique natural notion of rank-width for C-coloured graphs. We define two notions of rank-width for them, both based on a coding of C-coloured graphs by ${\mathbb{F}}^{*}$ -graphs— $\mathbb {F}$ -coloured graphs where each edge has exactly one colour from $\mathbb{F}\setminus \{0\},\ \mathbb{F}$ a field—and named respectively $\mathbb{F}$ -rank-width and $\mathbb {F}$ -bi-rank-width. The two notions are equivalent to clique-width. We then present a notion of vertex-minor for $\mathbb{F}^{*}$ -graphs and prove that $\mathbb{F}^{*}$ -graphs of bounded $\mathbb{F}$ -rank-width are characterised by a list of $\mathbb{F}^{*}$ -graphs to exclude as vertex-minors (this list is finite if $\mathbb{F}$ is finite). An algorithm that decides in time O(n ³) whether an $\mathbb{F}^{*}$ -graph with n vertices has $\mathbb{F}$ -rank-width (resp. $\mathbb{F}$ -bi-rank-width) at most k, for fixed k and fixed finite field $\mathbb{F}$ , is also given. Graph operations to check MSOL-definable properties on $\mathbb{F}^{*}$ -graphs of bounded $\mathbb{F}$ -rank-width (resp. $\mathbb{F}$ -bi-rank-width) are presented. A specialisation of all these notions to graphs without edge colours is presented, which shows that our results generalise the ones in undirected graphs.     

A Comparative Investigation of Optical and Structural Properties of Cu-Doped CdO-Derived Nanostructures

In this report, we studied various structural and optical properties of pure and copper-doped cadmium oxide (CdO) thin films. Nanostructured Cu-doped CdO films were deposited using sol–gel spin-coating technique. The structural and morphological changes have been observed by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and atomic force microscopy (AFM) studies. The optical and electrical properties of the pure and Cu-doped CdO thin films were studied by UV–vis spectroscopy and four-point probe method, respectively. The XRD peaks show the formation of nanocrystalline CdO with cubic face-centered crystal structure. The band gaps of the as deposited films were found in the range of 2.32–2.73 eV, while after doping, it decreases due to structural deformation. The electrical resitivity was found to decrease approximately ～10 in Cu-doped CdO thin films.     

Plating on acrylonitrile–butadiene–styrene (ABS) plastic: a review

ABS is an engineering plastic that has butadiene part uniformly distributed over the acrylonitrile-styrene matrix. It possesses excellent toughness, good dimensional stability, easy processing ability, chemical resistance, and cheapness. However, it suffers from inherent shortcomings in terms of mechanical strength and vulnerability to environmental conditions. Furthermore, it is non-conducting and easily fretted. Plating on ABS can serve to enhance the strength and structural integrity as well as to improve durability and thermal resistance resulting in metallic properties on the ABS material. ABS is described as the most suitable candidate for plating because it is possible to deposit an adherent metal coating on it by only the use of chemical pretreatment process and without the use of any mechanical abrasion. This article aims to review the history of ABS plastics, properties of ABS, processes and mechanisms of plating, and studies of plating on ABS involving mainly eco-friendly methods of plating by discussing the literature published in recent years. The details of electroplating of ABS carried out in the authors’ laboratory are also presented.